14.8V 10Ah custom lithium ion battery pack for garden tools and outdoor power equipment
A 14.8V 10Ah pack built from 18650 cells, for garden tools and outdoor power equipment. Its parameter table is transcribed below from its own listing, and its values belong to this listing alone.
Layered pack cross-section — the site's recurring diagram motif. It is a schematic, not a photograph of a product, factory or customer project, and it is not presented as a photograph of this company's factory.
Home / Details
About this model
This pack's listing describes it as a custom lithium battery pack built from 18650 cells, with the same three qualities as the solar packs. Safety and economy: a built-in PCM protection board covering over-discharge, over-charge and short circuits, environmentally friendly with no memory effects. Discharge characteristics: low internal resistance and high flat voltage characteristics during strong current discharge, ensuring a wider application field. Cycle life: long storage life with few limiting conditions, offering problem-free charging after long storage and permitting use in a wide range of applications. The listing adds that premium Li-ion batteries of this kind offer high energy density, long cycle life and safe, reliable performance, with custom packs and bulk orders at competitive wholesale prices.
The 14.8V nominal voltage is a four-series 18650 arrangement, and the 10Ah capacity at 14.8V stores about 148 watt-hours — a sensible size for a garden tool that runs for an hour or two between charges, rather than a storage-system capacity. The 5A maximum continuous discharge current covers about 74W at 14.8V continuously, which suits smaller garden tools and outdoor equipment; a larger tool with a higher peak draw would need a pack with a higher discharge rating, and a buyer should check the tool's peak draw against the 5A figure rather than assuming a 10Ah pack covers any garden tool.
The pack's weight, 800 g, and customised dimensions make it a pack designed around the tool, not a standard block: the dimensions are listed as customised available, which means the buyer and the manufacturer agree the outline for the tool's battery bay. A buyer ordering this pack should therefore send the tool's battery bay dimensions with the inquiry, and should confirm the outline, the protection and the certificate set — CE, RoHS, MSDS and UN38.3 as listed — in writing for the exact listing before ordering.
Technical parameters — as listed
| Item | Specification |
|---|---|
| Rated capacity | 10Ah |
| Nominal voltage | 14.8V |
| Max charge voltage | 16.8V |
| Discharge cut-off voltage | 11V |
| Charging current | 2A |
| Max. continuous discharging current | 5A |
| Cycle life | 500times |
| Discharge rate | ≤3% |
| Dimensions (T x W x H) | Customized available |
| Weight | 800g |
| Encapsulation | Not stated in this listing |
| Operating temperature | Charging: 0~45℃ / Discharging: -20~60℃ |
| Storage temperature | -10~45℃ |
| Humidity | 5% to 95% relative humidity |
| Certification | CE/RoHS/MSDS/UN38.3 |
| Main protection function | Overcharge, over discharge, over current, short circuit, etc. |
| Delivery period | 7-20 days, depending on stock and quantity |
How to read this table
Read the table as a specification for this listing alone. The rated capacity and nominal voltage describe the pack's energy class; the maximum charge voltage and discharge cut-off voltage describe the charger's and the device's voltage limits; the charging current and maximum continuous discharge current describe how fast the pack fills and how hard it can work; the cycle life describes the listing's stated durability; and the dimensions and weight describe the physical pack. No row in this table describes any other model, even one with a similar voltage or capacity.
Two rows deserve a direct question before ordering. The certificate row states what this listing claims, and the certificate set for the exact model should be confirmed in documents, since certificates are available upon request. The delivery and warranty rows state this listing's terms, and they should be confirmed for the exact order quantity, because terms stated for one listing do not transfer to another. A buyer who confirms those two rows in writing has removed the two most common sources of dispute in battery orders.
Confirm before you order
Send the device facts with your inquiry: device type, space, voltage, capacity, peak current, and this model description. Ask for the certificate set for this exact model, confirm the minimum order, price basis and lead time for this listing, and confirm payment and warranty terms before you pay. If the device's space, voltage or peak current differs from this listing, say so in the first line — the custom route, not a forced fit, is the honest next step.
Related pages
18650 packs · Custom packs · Choosing a custom pack · 18650 cell
How to place an inquiry, step by step
- Send the device facts. Tell us the device type, the available space (length, width and maximum thickness), the nominal voltage you need, the capacity or runtime you target, and the peak current if your device has motors, radios or heaters.
- Name the model or the chemistry. If a page on this site matches, quote its model description and listing details. If nothing matches, say so and describe the chemistry and voltage you need, so the conversation starts on the custom route.
- Confirm documents and terms in writing. Ask for the certificate set for that exact model, confirm the minimum order, the price basis and the lead time for that listing, and confirm payment and warranty terms before you pay. Terms stated for one model listing do not transfer to another model.
- Agree the sample step. Confirm whether the next step is a listed sample, an engineering sample for a custom design, or a small trial order, and what test you will run on arrival — fit in the enclosure, runtime, or peak-current behaviour.
Send all of this in one message through the contact page: device type, space, voltage, capacity, peak current, model description if you have one, and the documents you need. That is the whole inquiry — no separate form, no account, no extra step.
What to send us now
Send one message with your device type, the space the pack must fit, the voltage and capacity you need, the peak current if it matters, and the model description if a page on this site already matches. Add the documents you need — certificates are available upon request — and whether you need a listed model or a custom design. Use the contact page or write to [email protected], or call +86-755-25629920. A specific message like that is what turns a range of hundreds of models into a short, answerable question.