Custom 3S LiPO battery 11.1V 5600mAh for heated gloves and wearable devices
A three-series Li-polymer pack, 11.1V and 5600mAh, for heated gloves and wearable devices. Its parameter table is transcribed below from its own listing, and its connector and protection values belong to this listing alone.
Layered pack cross-section — the site's recurring diagram motif. It is a schematic, not a photograph of a product, factory or customer project, and it is not presented as a photograph of this company's factory.
Home / Details
About this model
This pack's listing describes it as a high-discharge custom solution, with LiPO batteries delivering superior high discharge rates for drones, RC vehicles and more, and custom packs and bulk orders at competitive wholesale prices with fast global shipping, as stated there. Its construction details are specific and useful. The pack has a built-in PCM supporting 0.5C charge and 1C continuous current, with a 10K ohm NTC for temperature protection. Its external cables are AWG 26, 50 mm long, with red for the positive cable, black for the negative cable and white for the NTC cable. Its connector is a Molex 51146-5P connector, customisable as the listing states.
The table's most useful rows for a wearable buyer are the size, the weight and the currents together. At 26 x 67 x 90 mm and 288 g, the pack fits a glove or a wearable device's pocket rather than a handheld device's bay, and its 5600mA maximum continuous discharge current at 11.1V covers about 62W — ample for heating elements and wearable electronics, provided the device's peak draw stays within the figure. The 300-cycle life at 100% depth of discharge, as listed, is shorter than the storage packs' figures on this site, which is normal for a small wearable pack cycled deeply and often; a buyer should compare it with the device's expected service life rather than with a storage pack's cycle life.
The applications listed for this pack are heated motorcycle gloves and wearable devices, with other uses left open. A buyer considering this pack for a different wearable should check the outline, the connector and the temperature protection against the new device, because the Molex connector and the NTC arrangement are part of this pack's design, not universal wearable standards. The Li-polymer guide on this site covers the general selection method for pouch packs; this page supplies the exact pack figures to put into it.
Technical parameters — as listed
| Item | Specification |
|---|---|
| Rated capacity | 5600mAh |
| Nominal voltage | 11.1V |
| Max charge voltage | 12.6V |
| Discharge cut-off voltage | 9.0V |
| Charging current | ≤1C |
| Max. continuous discharging current | 5600mA |
| Cycle life | 300 cycles at 100% DOD |
| Discharge rate | 1C |
| Dimensions (T x W x H) | 26 x 67 x 90 mm |
| Weight | 288g |
| Encapsulation | Aluminum plastic film/heat shrink PVC |
| Operating temperature | Charge: 0℃-45℃ / Discharge: -20℃-60℃ |
| Storage temperature | -10°C~45°C |
| Humidity | 65±20% |
| Certification | Not stated in this listing's table |
| Main protection function | Over charge, Over discharge, Over current, Short circuit etc. |
| Delivery period | Depend on order quantities |
| Warranty | 1 year since the date of shipping |
How to read this table
Read the table as a specification for this listing alone. The rated capacity and nominal voltage describe the pack's energy class; the maximum charge voltage and discharge cut-off voltage describe the charger's and the device's voltage limits; the charging current and maximum continuous discharge current describe how fast the pack fills and how hard it can work; the cycle life describes the listing's stated durability; and the dimensions and weight describe the physical pack. No row in this table describes any other model, even one with a similar voltage or capacity.
Two rows deserve a direct question before ordering. The certificate row states what this listing claims, and the certificate set for the exact model should be confirmed in documents, since certificates are available upon request. The delivery and warranty rows state this listing's terms, and they should be confirmed for the exact order quantity, because terms stated for one listing do not transfer to another. A buyer who confirms those two rows in writing has removed the two most common sources of dispute in battery orders.
Confirm before you order
Send the device facts with your inquiry: device type, space, voltage, capacity, peak current, and this model description. Ask for the certificate set for this exact model, confirm the minimum order, price basis and lead time for this listing, and confirm payment and warranty terms before you pay. If the device's space, voltage or peak current differs from this listing, say so in the first line — the custom route, not a forced fit, is the honest next step.
Related pages
Li-polymer packs · Li-polymer selection · Drone use · Chargers
How to place an inquiry, step by step
- Send the device facts. Tell us the device type, the available space (length, width and maximum thickness), the nominal voltage you need, the capacity or runtime you target, and the peak current if your device has motors, radios or heaters.
- Name the model or the chemistry. If a page on this site matches, quote its model description and listing details. If nothing matches, say so and describe the chemistry and voltage you need, so the conversation starts on the custom route.
- Confirm documents and terms in writing. Ask for the certificate set for that exact model, confirm the minimum order, the price basis and the lead time for that listing, and confirm payment and warranty terms before you pay. Terms stated for one model listing do not transfer to another model.
- Agree the sample step. Confirm whether the next step is a listed sample, an engineering sample for a custom design, or a small trial order, and what test you will run on arrival — fit in the enclosure, runtime, or peak-current behaviour.
Send all of this in one message through the contact page: device type, space, voltage, capacity, peak current, model description if you have one, and the documents you need. That is the whole inquiry — no separate form, no account, no extra step.
What to send us now
Send one message with your device type, the space the pack must fit, the voltage and capacity you need, the peak current if it matters, and the model description if a page on this site already matches. Add the documents you need — certificates are available upon request — and whether you need a listed model or a custom design. Use the contact page or write to [email protected], or call +86-755-25629920. A specific message like that is what turns a range of hundreds of models into a short, answerable question.